Tinkster Logo
All

Arduino Cellular Shield

Description: The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allows you to easily add SMS, GSM/GPRS, and TCP/IP functionalities to your Arduino-based project. All you need to add cellular functionality to your Arduino project is a SIM card (pre-paid or straight from your phone) and an antenna and you can start sending Serial.print statements to make calls, send texts and serve web pages!

 The main components of the Cellular Shield are a 60-pin SM5100B connector, a SIM card socket, and an SPX29302 voltage regulator configured to regulate the Arduino's raw voltage to 3.8V. The board's red LED indicates power. The Arduino's reset button is also brought out on the shield.

Two solder jumpers on the board allow you to select which serial pins interface with the cellular module - software (D2, D3) or hardware (D0, D1). There is also a 5-pin, 0.1" spaced header with connections for microphone inputs and speaker outputs. Headers are not soldered on, we recommend the 6 and 8-pin stackable headers.

The SM5100B cellular module is included with this product, however an antenna is not. It is pre-configured to 9600bps.

Documents:

Fritzing breadboard generated by brd2svg layer 21 text:GND GND text:SPK_P SPK_P text:SPK_N SPK_N text:MIC_P MIC_P text:MIC_N MIC_N text:Arduino Cellular Shield Arduino Cellular Shield text:Use AT+SBAND=4 for Europe Use AT+SBAND=4 for Europe text:Use AT+SBAND=7 for North America Use AT+SBAND=7 for North America text:TX TX text:RX RX element:C3 package:0603-CAP element:C5 package:EIA7343 element:JP1 package:SFE-NEW-WEBLOGO polygon polygon polygon polygon polygon polygon polygon polygon polygon polygon polygon polygon polygon element:JP2 package:FIDUCIAL-1X2 element:JP3 package:FIDUCIAL-1X2 element:JP4 package:SJ_3_PASTE1&2 element:JP5 package:1X05 element:JP6 package:SJ_3_PASTE2&3 element:LED1 package:LED-0603 element:R1 package:R0603 element:R2 package:R0603 element:R3 package:R0603 element:R6 package:R0603 element:S1 package:TACTILE_SWITCH_SMD element:U1 package:DUEMILANOVE_SHIELD_NOHOLES text:GND GND text:5V 5V text:RST RST text:VIN VIN text:3V3 3V3 text:0 0 text:1 1 text:2 2 text:3 3 text:4 4 text:5 5 text:Analog In Analog In text:GND GND text:13 13 text:12 12 text:11 11 text:AREF AREF text:10 10 text:9 9 text:8 8 text:7 7 text:6 6 text:5 5 text:4 4 text:3 3 text:2 2 text:TX TX text:RX RX text:GND GND element:U2 package:Q5-DD_SPX29300 SM5100B-D
100%

Connectors / Pins — 33 total

Download .fzpz
Module ID
cellular shield-v12
Category
RF & Wireless
Author
SparkFun

Similar Parts

SM5100B-D
SM5100B
DPAC WiFi Module
Fritzing breadboard generated by brd2svg SSOP20 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11
MLX90121
Fritzing breadboard generated by brd2svg QFN-32 1 32 2 31 3 30 4 29 5 28 6 27 7 26 8 25 9 24 10 23 11 22 12 21 13 20 14 19 15 18 16 17
NRF24LU1
RF Link Transmitter
RF24G Header