Govee Outdoor Pro Mount System

This is the mounting system I printed/used to install my Govee Permanent Outdoor Pros (v1). I printed these in PETG in order to hold up to the Midwest climate. The brackets are to be used with cord hiders from amazon (linked below). The bracket have stop point for the cord hiders so that everything gets spaced out evenly and properly. My house has 20deg peaks, so my peak mount is made to match that (you have to trim about ¼" off of the cord hiders that touch the peak mount to account for the angle). This system left me with a clean install with the added benefit of keeping the wires away from critters. Everything was model using Onshape and it linked below.

Cord hiders: https://www.amazon.com/dp/B0G29D41M6

Screws: https://www.amazon.com/dp/B0B3DJQY7P

Onshape project: https://cad.onshape.com/documents/390c42983dbdac53914a1a4c/w/3f35addeb2bb5a44df6c0d23/e/dcbade4cf01dbec4d58409d9?renderMode=0&uiState=6abcf9cc107f93466283cc16