VFC M249 Front Sling Stud Mount (for Airsoft)

Front end sling stud mount for the VFC M249 GBBR. Takes a #10-32 sling stud cut down to 10mm long. Print in PETG or something with good layer bond strength, threadlock with cyanoacrylate glue.

Stack up should be stud, #10-32 washer, plastic washer that comes with the stud, then screw everything into the stud mount. Pop your barrel out to make your life easier.

Threads are modeled into the print and you should be able to thread right into the part. Chase the threads with a tap if the stud won't thread in.

Amazon Link for the sling studs I used: https://a.co/d/09wy5dvl