Library Embosser: 3D Printable Tool, No Supports

Make your own version free in your browser, any size or design: meshcast.app/embosser

The classic FROM THE LIBRARY OF book embosser, with an open book and room for your name.

About this design

A round book embosser in the old ex libris style: FROM THE LIBRARY OF round the top, an open book in the middle and YOUR NAME round the bottom. Press it into the title page of every book you own or lend out. The file carries YOUR NAME as a placeholder: type your own name into the free embosser maker and it builds the same seal with your words.

Made with our free paper embosser maker, not modelled by hand: we drew the picture in code, uploaded it and set a 60 by 60 mm plate; the page traced it into the raised die and cut the matching cavity into the other plate. It prints as ONE part: the male die with the raised design and the female die with the matching cavity, joined by a print-in-place hinge, flat and open on the bed with no supports. Fold it shut over a card and squeeze. The design is 45 by 45 mm with a 1 mm relief. The zip holds exactly what the tool gives you, as an STL and as a 3MF with the relief as its own coloured part, plus the picture, to change and upload again.

Shown as a 3D render of the printed embosser and a card embossed with its mark, not a photo.

Made with Meshcast

Meshcast is a free toolkit for makers that runs in your browser: turn any 3D model into a candle, soap, concrete or silicone mold, or make your own cookie cutters, texture rollers, stamps and keychains. Nothing to install, and you can try every tool without an account.

• Paper Embosser Maker: meshcast.app/embosser
• Guide and print facts for this design: meshcast.app/3d-models/library-embosser
• 400+ ready-made molds and models: meshcast.app/3d-models
• Meshcast: https://meshcast.app/

Selling what you make?

Free for personal use under CC BY-NC. Selling what you cast or print from this design needs a Meshcast commercial licence (Pro or Founder): meshcast.app/licenses