INJORA Nylon Rock Buggy spare tire mount

I made this for my INJORA Nylon Rock Buggy Body for 1/24 SCX24 build, so it looks beter. To make this you need...

1x. M3x16 screw

4x. M2x8 screw

4x. M3 washers

1x. M3 nut

or what ever you have that will fit.

INSTRUCTIONS

First 3d print the STL file in PLA. Next you partially screw in the M2 screws and M3 washers in the four holes (you may need to drill out the holes to make it easier). Next you insert the M3 nut (you may need to insert the nut like how you would a heated insert). Next you slide the peace into the cage so were it looks like the photos then tighten the screws so where it clamps the cage. Finally take your tire and your M3 screw and screw it in like how it is in the photo. Thank You!

If you have any suggestions or problems please let me know.