Raspberry Pi 3b Waveshare 2,13" E-Ink Display Case

This is a remix of the case top from cjdavies.

I have modified the top part of the case to fit a Waveshare 2,13" E-Ink display and make it readable from the outside, without needing to modify the case or the display.

The display gets directly mounted to the 40pin header from the Raspberry Pi 3b with a 40pin header in between to make room for a heatsink to sit on the processor, so that the Pi can be passively cooled anyhow. The case sits snugly on the display so there is no need to attache it any further to the case or the Pi besides the 40 Pin header.

For the bottom Part the original will do just fine and the entire case is hold together by 4 M3*16 Screws wich sink into the screwholes at the topper of the case so they become invisible from the side.