Somewhat Parametric MFJ-4230MV/MFJ-4230MVP/PS-2230MB/PS-2230DBP Mounting Bracket

This model is customizable in OpenSCAD, but not within the Thingiverse customizer because it doesn't have the full BOSL2 library installed.

The BOSL2 Library, Installation Instructions, and Documentation can be obtained here: https://github.com/BelfrySCAD/BOSL2/

This Mounting Bracket was designed for mounting an MFJ-4230MV 30A PSU to a vented server rack shelf for a Ham Radio GO-Box. The PSU Mounting Hole Pattern should also work for the MFJ-4230MVP as well as Intellitron's equivalents the PS-2230MB and PS-2230DBP as I'm fairly certain they are just re-badged Chinese products. To fit the pattern on my vented shelf I did need to add mounting "wings" to the side of the mount so I have included STLs for single and dual extensions/wings as well.

The included customization is somewhat limited, but the SCAD Source is included so you can tinker/tweak it, or use as inspiration/reference if so desired.

Depending on mounting location PLA may be sufficient for this part, but since mine was going to be in a somewhat enclosed area in non-climate-controlled spaces (outdoors), I printed it in PETG.