Insta 360 X4 air chest mount bracket

I made this for for use on the insta360 x4 air after utilizing the original mounting hardware and realizing that it flops down after a bit of use due to it being mounted vertically. There are L shaped brackets out there that i tried out but they simply were too flimsy and this design ensures there won't be any sag compared to those L brackets.

Do note that the inside of the box isn't beveled in any way to fit the curves as fitting the camera wouldn't work otherwise. The box isn't meant to necessarily support the camera more so as it is there to provide structure to the bracket.

Printed on a bambu labs X1C using PETG-CF (10%) (I think it was a cheap 1kg spool that i got for like 25 USD)

You could realistically print this with pla, bpa, or any other material, i chose petg cf due to it's resistance to shear stress

This is my first design so let me know there's anything i missed so i can change it

Or change it up yourself, I've attached the assembly containing the part and the rough dimensions of the camera. It could be a better fit (roughly .02" smaller internal width and height where the camera rests) but i was worried about print shrinkage.