Unofficial Heavy Duty Tactical Mount - Compatible with Motorola VB400

📌 Summary

This is an independent, aftermarket 3D-printable mounting solution specifically designed to be compatible with the Motorola Solutions VB400 body-worn camera. This dual-component slide-lock system allows for a secure attachment to standard tactical vests and MOLLE webbing systems.

This model is an original creation designed entirely from scratch to offer an alternative mounting option. It has been printed and field-tested successfully using standard equipment.

🖨️ Designed and optimized independently with NASSCAD (nasscad.com).

⚖️ LEGAL DISCLAIMER & TRADEMARK NOTICE (Read Before Printing)

1. Trademark Compatibility Notice:

"Motorola" and "VB400" are registered trademarks of Motorola Solutions, Inc.

This 3D model is NOT an official product of, nor is it endorsed, sponsored, authorized, or manufactured by Motorola Solutions, Inc.

Reference to the brand name and device model is made strictly under nominative fair use to describe the compatibility of this independently designed accessory.

2. Disclaimer of Liability (Use at Your Own Risk):

This 3D model is provided "as is" without any warranties of any kind, either express or implied.

The author of this 3D design shall NOT be held liable for any direct, indirect, incidental, or consequential damages resulting from the use, misuse, or printing of this file.

This includes, but is not limited to: loss of equipment, physical damage to the VB400 camera, damage to tactical gear, or any operational failure during field service.

End-users are solely responsible for ensuring that the use of non-original, 3D-printed equipment complies with their local agency's internal regulations, equipment policies, and safety standards.

3. Intellectual Property:

This model is a 100% original design created via parametric modeling. No copyrighted digital files, proprietary schematics, or direct 3D scans of official Motorola parts were used or modified to create this object.

🖨️ Print Settings

Status: 100% Functional & tested on the field.

Material: PLA (Tested & fully approved for field use! Easy to print for everyone). PETG, PLA+, or ASA can also be used for enhanced environmental resilience.

Layer height: 0.2 mm.

Wall line count (Perimeters): 5 to 6 walls. (Crucial to ensure the strength of the clip mechanism).

Infill: 50% or higher (Gyroid pattern recommended).

Orientation: For maximum structural integrity against bending forces, print the parts lying on their side.

Tags: bodycam, vb400, tactical, mount, clip, molle, police, security, compatible, nasscad