Laser Pico Top O' Mast Mount for Robbie_Hawk Wind Direction Vane

Aardvarx55 made a nice wide direction vane similar to the commercial Little Hawk one. Aardvarx55 has designs for both the vane itself and a clip that allows that vane to be mounted. In order to mount this atop a Laser Pico mast, I needed one more version. This is a mash-up of Aardvarx55's Vane Retaining Clip and a clip to mount the assembly to the top of a Pico mast. The top of the Pico mast has a piece of webbing that crosses over the top of the mast. This clip slips under that webbing. With Aardvarx55's prints and a #6 (USA) / 4mm knitting needle as the spindle, you can assemble the wind direction device and mount it to the top of you Pico's mast. Happy sailing.

I printed in PETG (for UV and water durability) with 100% infill and 40 wall loops/perimeters. Mouth of the webbing clip facing upwards with supports.