Raspberry Pi CM5 Active Cooler Shroud

Shroud friction fits into the outer fins of the Waveshare Raspberry Pi CM5 Active Cooling heatsink, as well as passive heatsinks of similar size. Supports 30mm fan (3010): mount holes accept 3mm machine screws (tap directly into the plastic)

Settings I used:

• Sunlu PLA+ 2.0
• 0.20mm layer height
• 5 wall loops
• 4 top/bottom shell layers
• Suppport - 2 Raft layers, 0.15mm z-distance, concentric interface ( you might not need to use rafts, I'm just bad at this >D )