Ceiling mount pan joint for RSM-400 outdoor speakers

Got a set of these outdoor speakers for my deck and I really like them, but they only tilt and I wanted to be able to easily re-aim them depending whether we're dining, chilling, it's a party, or whatever.

Simple flange design. I printed mine in polycarbonate, but PETG or ABS would likely work just as well. PLA is not recommended for structural applications, especially outdoors. Print the parts separately, both with the lip down so that no support is needed and the interface between the two is a clean ironed surface. To install, put the two pieces back together as intended, then take the speaker off its bracket and attach the bracket to the inner piece with four button-head M5x12 machine screws + their nuts. Attach the outer bracket to your ceiling with flat-head drywall screws.

What it looks like in operation: https://youtube.com/shorts/MhleQu8j1cA

Speakers: https://www.klipsch.ca/products/rsm-400-indoor-outdoor-residential-surface-mount-loudspeaker

Screw kit: https://www.amazon.ca/dp/B0C3926M1B