Case for Stratux ADSB / FLARM permanent installation

I love my Stratux! Which is why I wanted a neat and permanent installation in my plane. I desigend a case which is attached to the bottom side of the glove box in my C150 so its unobstructive and you cannot even see it's there.

It is powered off 12V via a DC voltage converter and the case takes up all the components for full ADSB/AHRS functionality. See parts list below. It has openings for connection of power and external ADSB / GPS antennas. I am using a single, combined 1090MHz/FLARM antenna hooked up to the SDR modules via a Y-cable and the signal reception is excellent.

Parts List:

Raspberry Pi 4 https://www.amazon.de/dp/B07XQB3J63

Fan https://www.amazon.de/dp/B07ZBRJVSW

SDR modules https://www.amazon.de/dp/B076GWF6FF

DC converter https://www.amazon.de/dp/B0CGVMRQXB

USB extension https://www.amazon.de/dp/B083Y2DR9Z

GPS Antenna https://www.amazon.de/dp/B07LBWF1P7

Baro-Sensor https://www.amazon.de/dp/B07HMWB4PD

Gyro-Sensor https://www.amazon.de/dp/B0DF83DC5Y

ADSB/FLARM antenna search for : PNETAN80