Arduino Nano Ble 33 Magic Wand Case (Edge Impulse MakerFair25 Rome)

Make your own magician wand with AI and Arduino

Built for the Arduino Nano 33 BLE, presented at Maker Faire Rome 2025:

WS75 | "Make Your Own Magician Wand with AI and Arduino"

• Saturday, October 18 - 15:00-16:00
• Room 5: Make Lab (Area A)
• Hardware: Arduino Nano 33 BLE

https://makerfairerome.eu/en/

Adapt as you wish; your chopsticks, print quality, and wand design may vary wildly :D

Components

• Modular Wand-style case for the Arduino Nano 33 BLE (designed for PLA with external support for the wood turned style exterior)

Extendable for a battery pack or customizable wand end (like the chopstick version shown). (designed for PLA w/o support)

• Cap with the Edge Impulse logo, if you want to extend the holder as a battery holder, for a clean finish. (designed for PLA w/o support)
• Battery and Blues Wireless module holder, if you want to make your wand portable and IoT-connected. (designed for PLA w/o support)
• Lance-style end (attached via M5 screw and nut). (designed for PLA w/o support)

Not totally happy with this part; feel free to adapt it into a more traditional wand form. (designed for PLA w/o support)

Steps to follow after printing

1. Sign up on Edge Impulse Studio

2. Clone or train your own Motion Recognition with Anomaly Detection project

3. Deploy as an Arduino library

4. Flash your board using the Arduino IDE

5. Have fun 🪄

See you at Maker Faire Rome 🪄