3D printer case with Lack tables (Ikea)

Here is parts to build a 3D printer case with Lack tables from Ikea.

Edit: To regulate temperature within the case, you can use two 12V fan and a w1209 for example, that's what i will do. Here is a w1209 case i made too.

*

After printing parts, you need:

* 2 or 3 Lack table from Ikea

* 4 x acrylic glass (plexiglass) 4mm (0.157") thin 50cm x 44.5cm (19.68" x 17.52")

* Wood screws and hex screws

*

While mounting the plexiglass panels, you will have to cut a little piece in plexi to fit with top links. It's normal and easy to do with a jigsaw (or handsaw).

*

For those who want to use plexiglass of different thickness than 4mm, here is the files (only the files that change, you still have to download the master folder):

* Box with 2mm thickness plexiglass

* Box with 3mm thickness plexiglass

* Box with 5mm thickness plexiglass

*

Note: The L_shape.stl is to join the first table from floor and the second together. Rods of plastic are here to center the L without mesuring, cut them when you found their good place :)