Ramps 1.4 Enclosure for Vslot

Ramps 1.4 enclosure designed to mount to Vslot extrusion.

Originally designed for use on http://www.thingiverse.com/thing:1001065

Features:

-Mounting for Ramps/Arduino Controller

-60mm air intake fan

-Air exhaust vents

-Mounting for LED control board and IR sensor

-Openings for wire tubing on each side

-Flush mount lid screws

Designed to fit this Ramps/Arduino combo, which may have non-standard connector spacing, I also removed the Arduino power jack as it is not needed: http://www.ebay.com/itm/171908397844?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Verify before printing that this box will line up with your USB and Power connectors

Mounting Hardware Needed:

(4) M3 8mm bolt

(3) M5 10mm bolt

(3) M5 Square Nuts

(6) M5 washers

Designed to fit the following components:

Fan: http://www.digikey.com/product-search/en?keywords=259-1621-ND

Fan can be secured to plastic studs on the lid with epoxy/adhesive.

LED Control Board (removed from its enclosure with power jack removed also): http://www.amazon.com/gp/product/B00JRVSO38?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00

WireTubing: http://www.amazon.com/gp/product/B00U8LA25O?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00

I used the Mega standoff footprint from http://www.thingiverse.com/thing:915320