EM408_CON
This is the mating connector for the EM408 GPS receiver. The EM408 connects to the board via a cable,
this connector footprint does not include the outline of the receiver.
You should include the EM408_Outline device in your schematic if you are to use the EM408 in your design.
this connector footprint does not include the outline of the receiver.
You should include the EM408_Outline device in your schematic if you are to use the EM408 in your design.
100%
Connectors / Pins — 5 total
Download .fzpz
Module ID
SparkFun-Connectors-EM408_CON-Category
RF & WirelessAuthor
www.fritzing.org