RioRand LM2596

Step-down DC-DC Converter
(modified to correct all views by Peter Van Epp january 2018)

Corrected the pins so the part works in all views. Changed the sizes in bb and pcb to match the data sheet. PCB view had a small outline (possibly only for wires), changed it to pads in the same places as the module and added holes in the PCB silkscreen layer where the mounting holes on the module are (you need to check the alignment though as they are not fully specified on the drawing I used and I don't have one ...). so that you could mount the module on standoffs on a board. The mounting holes are only on silksceen, you need to drag a hole of the correct size over them if you want a hole in the actual board.<>